background image

U.S.A.

Jabsco

1485 Dale Way, P.O.Box 2158

Costa Mesa, CA 92628-2158

Tel:(714) 545-8251

Fax:(714) 957-0609

UNITED KINGDOM 

Jabsco

Bingley Road, Hoddesdon

Hertfordshire EN11 OBU

Tel:+44 (0) 1992 450145

Fax:+44 (0) 1992 467132

CANADA

Fluid Products Canada

55 Royal Road

Guelph, Ontario N1H 1T1

Tel:(519) 821 -1900

Fax:(519) 821-2569

JAPAN

NHK Jabsco Company Ltd.

3-21-10, Shin-Yokohama

Kohoku-Ku, Yokohama, 222

Tel:045-4758906

Fax:045-475-8908

GERMANY

Jabsco GmbH

Oststrasse 28

22844 Norderstedt

Tel:+49-40-53 53 73 -0

Fax:+49-40-53 53 73 -11

© Copyright 2000   

    

Printed in U.S.A.

All Rights Reserved 

Form: 43000-0664

Rev. 5/2000

ONE YEAR LIMITED WARRANTY

A.  LIMITED  WARRANTY: 

warrants that at the

time of shipment, the products manufactured by and

sold hereunder shall be in conformity with applicable writ-

ten specifications and descriptions referred to or set forth

herein,  free  from  defects  in  material  and  workmanship,

merchantable, and suitable for a particular purpose, pro-

vided  such  is  implied  by  State  law  under  the  circum-

stances of this sale.

B. WARRANTY ADJUSTMENT:

1. Agrees to repair or furnish a replacement for, but

not  to  remove  or  install,  any  product  or  componen

thereof which, within one (1) year from date of pur-

chase, shall upon test and examination by prove

defective within the above warranty. Receipt verifying

purchase date is required to obtain adjustment.

2. Buyer shall notify of any defect within this warranty

no  later  than  ninety  (90)  days  after  the  defect  is

discovered.

3. No product will be accepted for return or replacement

without  the  prior  written  authorization  of  ITT. Upon

such  authorization,  and  in  accordance  with  instruc-

tions  from,  the  product  will  be  returned  to,

shipping charges prepaid by Buyer. Products returned

to will be addressed as follows:

JABSCO

1485 Dale Way

Costa Mesa, California 92626-3998

Or to such alternate locations as may be designated on

the product, its container, or this sheet. Repair or replace-

ment made under this warranty will be shipped prepaid to

Buyer.

C. EXCLUSIONS FROM WARRANTY AND 

LIMITATION OF LIABILITY:

1. The  foregoing  warranty  is  limited  solely  as  set  forth

herein  and  applies  only  for  the  period  designated

above.

2. SHALL NOT BE LIABLE FOR ANY LOSS, DAM-

AGE, SPECIAL OR CONSEQUENTIAL DAMAGE OF

ANY KIND, WHETHER BASED UPON WARRANTY,

CONTRACT, NEGLIGENCE, OR STRICT LIABILITY

ARISING IN CONNECTION WITH THE SALE, USE,

OR REPAIR OF THE PRODUCT.

3. THE MAXIMUM LIABILITY OF IN CONNECTION

WITH THIS WARRANTY SHALL NOT IN ANY CASE

EXCEED THE CONTRACT PRICE FOR THE PROD-

UCT  CLAIMED  TO  BE  DEFECTIVE  OR  UNSUIT-

ABLE.

4. This warranty does not extend to any product manu-

factured by which has been subjected to misuse,

neglect, accident, improper installation, or use in vio-

lation of instructions furnished by.

5. This warranty does not extend to or apply to any unit

which has been repaired or altered at any place other

than  factory,  or  by  persons  not  expressly

approved  by,  nor  to  any  unit  the  serial  number,

model  number,  or  identification  of  which  has  been

removed, defaced or changed.

6. Components manufactured by any supplier other than

shall bear only that warranty made by the manu-

facturer of that product.

7. This  warranty  applies  to  products  defined  as  “con-

sumer products” by the Consumer Product Warranties

Act as from time to time amended.

D.  CONSUMER  RIGHTS: 

This  warranty  gives  you

specific legal rights, and you may have other rights which

vary from state to state. Some states do not allow exclu-

sion or limitation of damages.

STANDARD  WARRANTY:

If the products manufac-

tured and sold hereunder are not Consumer Products, the

warranty extended to Buyer shall be as set forth in sub-

paragraphs  (A),  (B),  and  (C),  EXCEPT  THAT  ALL

EXPRESS  OR  IMPLIED  WARRANTIES  OR  MER-

CHANTABILITY  OR  SUITABILITY  FOR  ANY  PARTICU-

LAR PURPOSE ARE EXCLUDED.

Summary of Contents for 37255-Series









Reviews: