Jabra Talk 15, User Manual

Page: 6 / 11

5
ENGLISH
TURNING YOUR HEADSET ON AND OFF
- Slide the on/off button towards the symbol “I” to turn
the headset ON . When you do so both indicators will
flash on the Jabra StatusDisplay™ .
- Slide the on/off button towards the symbol “O” to turn
the headset off .
PAIRING IT WITH YOUR PHONE
Headsets are connected to phones using a procedure
called ‘pairing’ . By following a few simple steps, a phone can
be paired with a headset in a matter of minutes .
1 Put the headset in pairing mode
- When you turn on your Jabra Talk 15 for the first time,
the headset will automatically start up in pairing mode –
i .e . it is discoverable for your phone . When the headset is
in pairing mode the Bluetooth ® status indication on the
StatusDisplay™ is flashing .
2 Set your Bluetooth
®
phone to ‘discover’ the Jabra Talk 15
- Follow your phone’s instruction guide . First make sure
that Bluetooth
®
is activated on your mobile phone . Then
set your phone to discover new devices . This usually
involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu
on your phone and selecting the option to ‘discover’ or
‘add’ a Bluetooth
®
device .*
3 Your phone will find the Jabra Talk 15
- Your phone will find the headset under name “Jabra Talk
15” . Your phone then asks if you want to pair with the
headset . Accept by pressing ‘Yes’ or ‘OK’ on the phone .
You may be asked to confirm with a passkey or PIN .
Then use 0000
(4 zeros) . Your phone will confirm when pairing is
complete and the Bluetooth
®
status indication on the
StatusDisplay™ will shift from flashing light to steady
light and the headset voice guidance will say “connected” .
* Phone dependent