background image

Safety

1. To prevent possible hearing damage, do not listen at high volume levels for long periods. 

2. Risk of explosion if battery is replaced by an incorrect type, dispose of battery according to 

the instruction. 

Recycle your products: 

The WEEE logo appears on the product to indicate that this product 

must not be disposed of or dumped with your other household wastes. You are liable to 

dispose of all your electronic or electrical waste equipment by transporting to an appropriate 

collection point for recycling of such hazardous waste. 

FCC Radiation Exposure Statement: 

This equipment complies with FCC radiation exposure 

limits set forth for an uncontrolled environment. 

IC Warning: 

This device complies with Industry Canada license-exempt RSS standard(s). 

Operation is subject to the following two conditions: (1) this device may not cause interference, 

and (2) this device must accept any interference, including interference that may cause 

undesired operation of the device. 

IC Radiation Exposure Statement: 

This equipment complies with IC RSS-102 radiation exposure 

limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-

located or operating in conjunction with any other antenna or transmitter. 

FCC Notice 

This device complies with Part 15 of FCC rules. Operation is subject to the following 2 

conditions: (1) This device may not cause harmful interference, and (2) This device must accept 

any interference received, including interference that may cause undesired operation. Changes 

or modifications not expressly approved by the party responsible for compliance could void the 

user’s authority to operate the equipment. 

Warranty

Eartec items are warranted against defects in material and/or factory workmanship 

for a set period from the date of purchase.  Standard repairs due to misuse or wear 

and tear, as well as replacement parts including but not limited to batteries, padding, 

USB cable, etc. are excluded.  Shipping to Eartec is at customer’s expense, Eartec will 

pay for return ground shipping if the product warranty applies to the repair.  Call for 

details.

Shipping

Prior to returning your headset for warranty or service you must call Eartec for an RA 

(return authorization) number: 1.800.399.5994.

General Service

All repair work will be performed for the cost of replacement parts and return 

shipping from the Eartec factory.

Service / Eartec

www.eartec.com

145 Dean Knauss Drive

1.800.399.5994

Narragansett, RI. 02882

The        EVADE

Full Duplex Wireless Systems

Summary of Contents for EVADE

Page 1: ...must not be co located or operating in conjunction with any other antenna or transmitter FCC Notice This device complies with Part 15 of FCC rules Operation is subject to the following 2 conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Changes or modifications not expressly ...

Page 2: ...power button on the REMOTE headset s 3 The LED on all headsets will flash then turn solid green indicating headsets have linked Note to turn off press and hold the power button for 4 5 seconds When LED blinks red release Set Volume EVADE feature five volume settings Click UP or DOWN buttons to adjust Audible tone indicates low or max volume Microphone Placement Position the microphone one finger w...

Page 3: ... not be co located or operating in conjunction with any other antenna or transmitter FCC Notice This device complies with Part 15 of FCC rules Operation is subject to the following 2 conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Changes or modifications not expressly appr...

Page 4: ...icates power is ON o Press the power button on the REMOTE headset s o The LED on all headsets will flash then turn solid green indicating headsets have linked Note to turn off press and hold the power button for 4 5 seconds When LED blinks red release ON OFF Power Volume UP DOWN o To eject battery from headset press and slide door down to open battery compartment o Insert battery as shown close ba...

Reviews: