4
ENGLISH
JABRA SUPREME
GETTING STARTED
Please follow these steps before using the Jabra SUPREME:
1 Charge the Jabra SUPREME using the supplied AC charger and
USB cable .
2 Activate Bluetooth® on your phone or device (refer to the
manual of your device)
3 Turn your Jabra SUPREME on by flipping open the boom, and
pair it with your mobile device by following the voice guidance .
NOTE:
Voice Guidance and Voice commands are enabled as the
default setting when you turn on your Jabra SUPREME the first
time . You can at any time disable by pressing the
Voice
button
while you flip the boom arm to
On
position . You will hear a tone
and SUPREME will no longer talk to you or listen for commands .
Repeat the process to enable the voice features again .
CHARGE YOUR JABRA SUPREME
Make sure that your headset is fully charged before you start
using it . Use the USB cable to connect Jabra SUPREME to a
USB port or use an AC charger . The battery indicator light will
Flash Green while charging . When light goes out the charge is
complete . A full charge takes approximately two hours . .
Only use the charger provided in the box – do not use chargers
from other devices as this may damage your headset . Also you
should not use your supplied SUPREME charger to charge other
devices .
NOTE:
The lifetime of the battery will be significantly reduced
if your device is left uncharged for a long period . We therefore
recommend that you recharge your device at least once a month .
WEARING STYLE
The Jabra SUPREME is ready to be worn for right ear wearing, but
if you prefer left ear wearing remove the ear hook and turn it and
while you flip the boom arm to
On
position . You will hear a tone
