Jabra GN9330e - USB - Headset Manual Download

Page: 3 / 4

LEDs from left to right:

LED 1 = RHL

LED 2 = DHSG

LED 3 = AEI

LED 4 = MSH

Now you can switch between the different software modes (LED 1-4) by

using the "volume" up/down controller on the headset. To confirm the

software has successfully installed, the base automatically switches back

to charge mode after approx. 15 seconds.

Base setup:

Set the phone set-up switch to "A".

Phone setup:

In version 2.5.1.2000 the DHSG mode is disabled by default and must be

activated via the Aastra.cfg or mac.cfg with the command dhsg:1.

From version 2.5.2 Options> Preferences> Audio Settings> DHSG > On

The audio mode must be set to "Headset/Speaker" in the phone settings:

Options > Preferences > Audio Settings > Audio Mode > Headset/Speaker.

supported!

23/11/2022 14:54

https://www.jabra.in/supportpages/jabra-link-14201-10/14201-10/faq/f698f087-85fd-492f-
9aea-affbf082d1dd

Page 3 of 4

Summary of Contents for GN9330e - USB - Headset

Page 1: ...55i 57i 57iCT Aastra 6753i 6755i 6757i 6757i CT From phone firmware 2 5 1 2000 or higher Connection Important Please note that remote call control for the Jabra GN9330e is supported from version L or...

Page 2: ...to the socket marked with a phone symbol and the RJ45 plug into the base socket of the Jabra GN9330e marked with AUX Software setup Put the headset into the base and activate the DHSG mode Hold down t...

Page 3: ...o A Phone setup In version 2 5 1 2000 the DHSG mode is disabled by default and must be activated via the Aastra cfg or mac cfg with the command dhsg 1 From version 2 5 2 Options Preferences Audio Sett...

Page 4: ...eard in the headset you can answer the call by pressing the answer end button on the headset by pressing again the call is ended 23 11 2022 14 54 https www jabra in supportpages jabra link 14201 10 14...