2
Figure 1
Side 2 Connector Mode
6
Select
3
Jabra Headset Kit.
Figure 2
Enable Jabra Headset
7
Press the OK softkey.
8
Press the Exit softkey.
9
Press the Yes softkey to restart the phone.
Note:
You must restart the phone to fully enable the Side 2 con-
nector mode.
E n a b l e a l l p h o n e s f o r a J a b r a B l u e t o o t h ® h e a d s e t
u s i n g t h e XM L c o n f i g u r a t i o n f i l e
Note:
If there are phones with DCL-60 Line Key Modules on
your network, changing the configuration file will disable
the line key modules for those phones. You will need to
enable the connector for the DCL-60 Line Key Module at
each phoneset device with a line key module if you
change the setting in the master configuration file.
1
Open the default master configuration file:
DT700 phones: dt-000000000000.cfg
DT730G phones: dt-000000000000g.cfg
2
Edit the configuration file so the value for the
mntn.dcl.option is “2” to support the Jabra Headset Kit.
Table 1.1
Side 2 connector Operation Modes
3
Restart all phones on the network to fully activate the Side
2 connector for the Jabra Headset Kit. The Side 2
connector on all phones in your network will be enabled for
the Jabra Headset Kit.
HEASET SETUP
He a d se t B as e S t at i o n S e tu p
•
Follow the manufacturer’s instructions for assembling
your headset and base station. Do not connect the power
adapter to the headset base station yet. If you have
already connected the power adapter, unplug it from the
wall outlet and the headset base station.
E n a b l e t h e H e a d s e t p o r t o n y o u r p h o n e
1
Press the Menu key on the phone.
2
Select
3
User Settings.
3
Select
2
Headset.
Figure 3
Select Headset
4
Select
1
Enable/Disable.
XML Tag
Range
Description
mntn.dcl.option
0 – Debug Con-
sole
Not supported.
1 – DCL-60
Default. Selects the DCL-
60 Line Key Module
mode for the Side 2 con-
nector.
Note
: The DCL-60 Line
Key Module is currently
only available on
the
3C
system.
2 - Jabra Head-
set Kit
Selects the Jabra Head-
set Kit mode for the Side
2 connector