Jabra BT2035, User Manual

Page: 11 / 310

8
Jabra bT2035
What the liGhts mean
What you see What this means about your headset
solid light: in pairing mode – see Pairing section
slow single flash: connected to phone and in standby
mode*
slow double flash: not connected to phone and in
standby mode*
Quick single flash: active on call
Quick double flash: incoming/outgoing call
Triple flash: battery low
* bT2035 is equipped with Jabra discreet light feature, meaning
that light indicator (led) turns off after 1 min of non-activity .
headset is still active, and light will flash again after a tap on the
answer/end button or any call activity .
troubleshootinG & faQ
I hear crackling noises
- for the best audio quality, always wear your headset on the
same side of the body as your mobile phone .
I cannot hear anything in my headset
- increase the volume on your phone .
- ensure that the headset is paired with the phone .
- make sure that the phone is connected to the headset – if it
does not connect either from the phone’s menu or by
tapping the answer/end button, follow the pairing procedure
(refer to pairing section in this user manual) .
- you can determine whether your headset is connected to a
device by looking at the flashes on the headset after tapping the
answer/end button when the headset is on: single slow flashes
means that the headset is connected to a device, double slow
flashes means that the headset is currently not connected .