33
english
Jabra GO 6430 User manUal
the JabRa link 350 uSb
9.
Bluetooth®
adaPteR
the Jabra lInK 350 Usb
Bluetooth®
adapter and travel Charger are included with the Jabra GO 6430 package;
they are available as accessories for all other Jabra GO solutions. this chapter explains how to use the Jabra lInK
350 Usb
Bluetooth®
adapter. this chapter explains how to use the travel Charger. see also
Chapter 3: Product
overview
for detailed diagrams.
JabRa link 350 uSb
9.1
Bluetooth®
adaPteR diaGRaM
1. Activity indicators (LEDs)
2. USB plug
3. Multifunction button
LINK350
2
1
3
Figure 19: Jabra lINK 350 uSB
bluetooth®
Adapter
PuRPoSe of the JabRa link 350 uSb
9.2
Bluetooth®
adaPteR
the Jabra lInK 350 Usb
Bluetooth®
adapter connects to your computer and communicates with your headset via
bluetooth® wireless technology. It provides the following features:
- basic bluetooth® wireless technology connection
- softphone control
- Wideband audio
- headset configuration
though it is also possible to pair your Jabra GO headset with any standard bluetooth® wireless technology
device — including
Bluetooth®
pC cards — this type of pairing provides only the basic connection (the first
point listed above) and you may also experience compatibility issues. softphone-control, wideband audio and
headset-configuration features require the Jabra lInK 350 Usb
Bluetooth®
adapter.
PaiRinG the JabRa link 350 uSb
9.3
Bluetooth®
adaPteR and headSet
the headset and Jabra lInK 350 Usb
Bluetooth®
adapter are already paired from the factory. the procedure given
below is only necessary if pairing is lost.
to pair your Jabra GO headset and Usb
Bluetooth®
adapter:
1. attach the Usb
Bluetooth®
adapter to your pC and turn on the pC (see also the section
4.4: Jabra lINK 350 uSB
Bluetooth® Adapter Setup and Connections).
2. put the Usb
Bluetooth®
adapter in pairing mode by pressing and holding its multifunction button for about
2 seconds — until its blue pairing led turns on and stays lit.
3. If your headset is currently turned on, turn it off by pressing and holding on its multifunction button for about
4 seconds — until its led gives three quick red flashes and then turns off.
4. put your (powered-off) headset in pairing mode by pressing and holding on its multifunction button for about
4 seconds — until its led lights a constant blue.
