Jabra 14201-20 - How To Connect Download

Page: 2 / 3

EHS setup:

The Jabra GN912x must be set up on DHSG EHS. (The Jabra GN9120

DHSG is always supplied in DHSG mode).

You can check or set it as follows.

1. Place the headset in the base.

2. Then press the PLUS and MINUS buttons simultaneously for 6 seconds

until the online display on the headset starts to flash.

3. The base will now display to you the EHS currently installed. The online

indicator light indicates "MSH", the pulsating light indicates "RHL", the

MUTE light "DHSG" and the battery display "AEI".

4. With the PLUS and MINUS buttons, you can now switch between the

different EHS types.

automatically switches back to charge mode after approx. 10 seconds

Base setup:

11/08/2022 06:23

https://www.jabra.in/supportpages/jabra-link-14201-20/14201-20/faq/fff7d129-9c8c-4eb8-
adcd-bc21a6f34e35

Page 2 of 3

Summary of Contents for 14201-20 -

Page 1: ...e EHS adapter 2 Now connect the end of the RJ45 to RJ45 connection cable EHS adapter marked in red to the socket marked AUX on the EHS adapter as well as with the AUX socket on your GN912x base 3 Now...

Page 2: ...display to you the EHS currently installed The online indicator light indicates MSH the pulsating light indicates RHL the MUTE light DHSG and the battery display AEI 4 With the PLUS and MINUS buttons...

Page 3: ...which immediately produces a signal tone 3 You can now increase the volume with PLUS or decrease the volume with MINUS 4 To confirm after approx 10 seconds a low signal tone sounds in the headset in t...