The JA-122PW/JA-122PW (G) Bus dual PIR and MW motion detector
JA-122PW/JA-122PW (G)
2/2
MON51101
the nature of MW detection, the detection characteristic can drastically
change in relation to the size, shape and furnishing of a protected area,
especially with regard to metallic materials which can reflect or block
transmitted MW signals.
During installation, it’s always necessary
to test whether the detector sufficiently
covers the area.
Installation accessories
JA-196PL-L – Detector wall holder.
If a more aesthetic installation is required, it is possible to use the
JA-196PL-L wall bracket, it is supplied in two colours – white and grey. With
the use of this bracket it is possible to partially put the detector in a wall or
plasterboard wall.
JA-191PL – PIR jointed bracket.
It is used for special placement, such as installation on the ceiling or at a tilted
angle (greater installation height). The jointed bracket is a certified detector
accessory having its own tamper contact which is to be connected to a connector
inside the detector (6).
Technical specifications
Power supply:
from the control panel bus 12 V DC (9 ... 15 V)
Current consumption:
- in standby mode
5 mA
- for cable choice
16 mA
Recommended installation height:
2.2 – 2.5 m above floor level
Detection angle/PIR coverage:
90°/12 m
Detection angle/MW coverage:
80°/12 m
MW Frequency:
24.125 GHz
Maximum MW radio-frequency power (ERP):
30 mW
Dimensions:
150 x 63 x 40 mm
Weight:
120 g
Classification:
Security grade 2/Environmental class II
(According to EN 50131-1)
Environment:
Indoor general
Operating temperature range:
-10 °C to +40 °C
Average operational humidity:
75 % RH, w/o condensation
Certification body:
Trezor Test s.r.o. (no. 3025)
In compliance with:
ETSI EN 300 440, EN 50130-4, EN 55032,
EN 62368-1, EN 50581, EN 50131-1, EN 50131-2-4
Operating conditions according to general authorization
ERC REC 70-03
JABLOTRON ALARMS a.s. hereby declares that the
JA-122PW/
JA-122PW (G)
product is in a compliance with the relevant
European Union harmonisation legislation: Directives No:
2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU if it is used as
intended. The original of the conformity assessment can be found
at www.jablotron.com - Downloads section.
Note:
Although this product does not contain any harmful
materials, we suggest you return the product to the dealer or
directly to the producer after use. For additional info please visit
in the download section.
