jablotron 100+ User Manual Download Page 24

23

4.5   CALENDAR EVENTS SET UP

It is possible to configure calendar events (unsetting / setting 

/ partial setting, controlling or blocking PG outputs).

The calendar events can be set up via the J-Link software  

in the Calendar tab.

For each calendar event, action, section or PG output and 

event time can be set. Day can be defined  
by a day of week, month or year. For the selected day you can 
set up to 4 times to perform an action or to set repeating  
at regular intervals.

Therefore, calendar events can be customized not only for sections control but also for controlling 

various technologies in the object using PG outputs.

The security system stores all performed operations and events (setting, unsetting, alarms, faults, 

messages sent to users and ARCs) in the micro SD card in the system’s control panel. Each entry includes 
the date, time (start and end), and source (cause/origin) of the event.

The different ways of browsing through the system’s event history:

5.1   USING THE LCD KEYPAD

Accessing the event history using the keypad requires user authorization. Once authorized, the available 

options (based on user permissions) are displayed by choosing Event Memory. Records can be viewed 
using arrows.

5.2    USING THE J-LINK SOFTWARE AND A COMPUTER

The system memory can be browsed using the J-Link software. Events can be downloaded from  

the control panel in small (about 1,200 events) or larger (about 4,000 events) batches. The events  
can be filtered in detail, colour-coded for easier orientation, or saved into a file in a computer.

5.3   LOGGING INTO MyJABLOTRON (WEB/SMARTPHONE)

All system events can be viewed after logging in the MyJABLOTRON web/smartphone interface.  

The account shows history in a range which corresponds with the user’s permissions. 

4.   CUSTOMIZING THE SYSTEM

5.   EVENT HISTORY

Summary of Contents for 100+































Reviews: