I A P 2 0 2 0 . 0 0 1 - A F M /
J A B I R U J 1 6 0 / J 1 7 0
P a g e
|
33
FOR SIMULATION USE ONLY
Note:
If the multi-function knob is not used within 2 seconds of entering heading or
altitude adjust mode, the system will revert to heading or altitude hold mode.
AMCP PRACTICAL EXAMPLES
Following a NAV route;
1. Press AP to engage Roll and Pitch Hold.
2. Press NAV to engage NAV lateral hold mode.
Climbing to 5,000 feet;
1. Press AP to engage Roll and Pitch Hold.
2. Press ALT to capture current altitude and engage altitude hold mode.
3. Press ALT again to engage altitude adjust mode.
4. Use the Multi-Function Knob to adjust the altitude value to 5,000ft.
5. When the altitude mode reverts to altitude hold mode (static green light),
use the Multi-Function Knob to adjust your vertical speed component.
6. When at the selected altitude, the autopilot will cancel your climb and
level off.
Turning to heading 090 degrees;
1. Press AP to engage Roll and Pitch Hold.
2. Press HDG to capture current heading and engage heading hold mode.
3. Press HDG again to engage heading adjust mode.
4. Use the Multi-Function Knob to adjust the heading value to 090 degrees.
5. The aircraft will commence the turn onto heading as soon as you begin to
adjust the value.
