Vibe 10
E
Control
1
Switching on the Vibe 10
Figure 4: On/off button
Press and hold the on/off button (9) for several seconds.
If the device was in sleep mode, it can be used immediately. If the device is no longer in a shutdown state, then it is ready
for use provided Mind Express has fully started up.
2
Charging the Vibe 10
The amount of time for which you can use your device without needing to charge it depends greatly on how you use it:
•
the audio volume
•
the time set before the device reverts to sleep mode
•
your Bluetooth and Wi-Fi usage
If the device is used a lot, it is recommended that you recharge it every day. To do this, use only the supplied power
adapter. The device can still be used while charging. A charge status between 40 % and 90 % increases the service life
of the battery.
Charge the device preferably at room temperature (about 20 °C / 68 °F). Temperatures lower than 5 °C (41 °F) and higher
than 45 °C (113 °F) may adversely affect the battery.
Figure 5: Connection for charging the device
1.
Check the power status. See
on page 11.
2.
Connect the supplied power adapter between the device (10) and the power supply.
E
Control
10
1
Switching on the Vibe 10
