Jabbla Allora, Manual, Page: 7 / 51

Allora
V1.0.1.1. 14-07-2006
7
Allora’s on/off switch
The on/off switch of Allora is located at the bottom side of the device, near to
the mini-jack connector for the switch input.
Press the on/off switch shortly until the backlight of the display turns on.
At the same time the on/off indicator will start blinking green once per
second, to inform you that Allora is starting up. This will take about 20
seconds.
After a short while the name - allora - will appear on the display and a few
moments later a cursor will appear at the beginning of the first line of the
display. Now you can start typing a message.
You do not have to turn off Allora when you are not using it for a while. Allora
automatically goes into a power down mode after a (definable) specific time
in order to minimize power consumption. You can also initiate the power
down mode by pressing the touch key
Moon
.
on/off switch
On/off indicator