Jabbla Allora, Manual

Page: 35 / 51

Allora
V1.0.1.1. 14-07-2006
35
Scanspeed - Post selection delay - Acceptance time
Choose the parameter you want to change using the
Space bar.
Change the parameter setting with the
Enter
key.
Press the Message key to leave the menu.
Press the CLR key to go back to the top menu.
Scanspeed: 1..10
The Scanspeed defines the speed Allora uses to step through the rows of the
scan matrix: 1 = very slow ... 10 = very fast.
Post selection delay: 0,1,2,3,4,5
When the Post selection delay is set to 0, there is no delay time after a
selection. Allora will immediately accept another switch action. When the
Post selection delay
is set to 1 or higher, Allora will accept switch action
before a specific period of time has expired: 1= a short time .. 5 = a longer
time.
Acceptance time: 0,1,2,3,4,5
This parameter defines how long the switch has to be pressed and hold
before it is accepted as a selection: 0 = immediately accepted .. 5= the switch
has to be pressed and hold a longer period of time.