Allora
V1.0.1.1. 14-07-2006
31
Use Allora with 1 switch: scanning
Allora can be operated with one switch. Connect a switch via the mini-jack
connector with Allora.
Allora will start the scanning algorithm as soon as you press the switch. To
stop scanning put Allora in standby mode by pressing on the
Moon
key, then
wake up Allora by pressing the
Moon
key once more (or any of the other
touch keys or the
Fn
key).
The scanning algorithm consists of a row-column scanning, appearing at the
right end of the first line. The first row in the scan matrix consists of 5 figures,
representing the predictions. The following rows consist of characters (five
each), representing the alphabet. To make a selection wait until Allora shows
a row containing your choice. Then press the switch. Allora now offers you
the different possibilities within the chosen row. Wait until your choice is
presented and press the switch.
If you made a mistake and you are in the wrong row, wait until all possibilities
have been presented. The following moment nothing will be displayed for a
short while. Now press the switch to escape from the wrong row.
Mini-jack
connector
Summary of Contents for Allora
