Allora 3
G
Maintenance and troubleshooting
1
Maintenance
1.1
Repairs
In the event of damage to the device, please contact the distributor of the device.
Do not attempt to carry out any repairs yourself. This could damage the device and invalidate your warranty.
1.2
Cleaning the device
Clean the device regularly so you do not give bacteria the chance to spread.
It is best to remove dust with a dry, soft cloth. For minor stains on the casing, use a damp cloth. Do not use a product
containing alcohol, ammonia or abrasive agents. Make sure no moisture can enter through the openings (such as: the
microphone openings or the connectors). Any dirt near the connectors can be removed with a cotton bud.
To clean the screens, also use a dry cloth; do not use kitchen paper as this may cause tiny scratches. To remove grease
or stains from the screens, it is recommended that you use cleaning agents specifically designed for cleaning screens
(aerosol or wipes). Do not press too hard on the screens when cleaning.
Clean the keyboard with cleaning agents specifically intended for this purpose. Always use a damp cloth for this.
Clean the carry case with a dry or slightly damp cloth, or a soft hand brush.
2
Troubleshooting
2.1
Finding the Allora 3 serial number
In your dealings with the support department, you will be asked to supply the serial number of your device.
You will find the label with the serial number of the device on the rear panel of the device.
Example: AL3 1002
Figure 8: Allora 3 type plate
G
Maintenance and troubleshooting
1
Maintenance
29
Summary of Contents for Allora 3
Page 1: ...Allora 3 Operating instructions ...
Page 6: ...Allora 3 4 ...
Page 37: ...Allora 3 35 ...
Page 38: ......