Allora 3
E
Control
1
Put the device manually into sleep mode
Sleep mode is an energy-saving mode that allows you to quickly wake up the device again. You can also set whether and
when the device automatically switches to sleep mode.
Briefly press .
2
Wake the device from sleep mode
The device is in sleep mode when the screen is off and the on/off indicator lights up. If the indicator is not illuminated,
the device is completely off.
Briefly press .
The screen will immediately light up.
3
Charge the device
The amount of time for which you can use the device without needing to charge it depends greatly on how you use the
device and on:
•
The volume
•
The time set before it switches to sleep mode
•
The use of Bluetooth and Wi-Fi
If the device is used a lot, it is recommended that you recharge the device every day. To do this, use only the supplied
power adapter. The device can still be used while it is being charged.
It is preferable to charge the device at room temperature (about 20 °C / 68 °F). Temperatures lower than 5 °C (41 °F) and
higher than 45 °C (113 °F) may adversely affect the battery.
Figure 6: Connection for charging the device
1.
Check the power status. See
on page 17.
2.
Connect the supplied power adapter between the device USB-C port (2) and the power supply.
When the battery charge indicator LED (3) lights up green, the device is fully charged.
E
Control
1
Put the device manually into sleep mode
17
Summary of Contents for Allora 3
Page 1: ...Allora 3 Operating instructions ...
Page 6: ...Allora 3 4 ...
Page 37: ...Allora 3 35 ...
Page 38: ......