USB DISPLAY ADAPTER
USER MANUAL
22
Multi-USB 3.0 Display Adapter Installation
For installation of multiple
USB 3.0 Display Adapters
, during the “
Install
Shield Wizard complete”
step, select
“No, I will restart my computer later.
”
and click
Finish
to continue next step below
A.
Connect all external display devices (monitor/ projector) to the
VGA/DVI connector of
USB 3.0 Display Adapters
and switch power
on.
B.
Connect the
USB 3.0 Display Adapter
into available USB port of PC
or Notebook.
After Inserting an
USB 3.0 Display Adapter
into a USB port, the systems
will automatically start the installation procedure and the prompt
message will pop-up on the task bar.
The Device driver software was installed properly, if you are going to install
more
USB 3.0 Display Adapters
, repeat step
A & B
or restart computer
