USB DISPLAY ADAPTER
USER MANUAL
12
6.
After rebooting connect the external display device (monitor/
projector) to the VGA/DVI connector of USB Display Adapter and turn
on the display device.
7.
Connect the
USB 3.0 Display Adapter
into an available USB
port of a PC
or Notebook, After Inserting the
USB 3.0 Display Adapter
into an USB
port, the “
Installing device driver software
” message will pop up.
If the Driver software was installed successfully the following message
should appear:
If you’re not going to install another
USB 3.0 Display Adapter
, restart your
PC. The functions of
the
USB 3.0 Display Adapter
will be activated after
the computer restarted.
Multi USB 3.0 Display Adapter Installation
For installation of multiple
USB 3.0 Display Adapters
, during the “
Install
Shield Wizard complete”
step, select
“No, I will restart my computer later.
”
and click
Finish
to continue next step below
