USB DISPLAY ADAPTER
USER MANUAL
21
6.
After your computer is rebooted, connect the external display device
(monitor/ projector) to the VGA/DVI connector of
USB 3.0 Display
Adapters
and turn it on.
7.
Connect the
USB 3.0 Display Adapter
into an available USB port of a PC
or Notebook, After Inserting the
USB 3.0 Display Adapter
into an USB
port, the “
Installing device driver software
” message will pop up.
An icon (
) will be seen on the lower right toolbar.
The message pictures below shows Driver software is installed
successfully.
If you’re not going to install another
USB 3.0 Display Adapter
, restart your
PC. The functions of
the
USB 3.0 Display Adapter
will be activated after
the computer restarted.
