0
3
ENGLISH
-
ASSEMBLY INSTRUCTIONS DPS KIT 20/85
ENGLISH
-
ENGLISH
-
ASSEMBLY INSTRUCTIONS
KIT COMPONENTS
Element
A
- 1 Cover
Element
B
- 1 Plastic column
Element
C
- 1 DPS positioner PCB
Element
D
- 2 Sheet metal Fixing screws
Element
E
- 1 Plastic Fixing screws
PREPARING THE COVER:
The cover of the kit is for a J4C BLUE-20, 35 and 55 models. In case you want to mount a kit on a J4C85,
follow the instructions:
A
C
B
Remove the
sleeve 1 and
leave the
Oring inside.
sleeve
O-ring
1
D
E
Introduce the
sleeve in hole
A and press it
until is fully
inside (Fig.A)
introduce the
cap in hole B
and press it
until it is fully
inside (Fig.B)
sleeve
cap
PLEASE READ CAREFULLY BEFORE MOUNTING.
VERY IMPORTANT!!!! PLEASE FOLLOW THE INSTRUCTIONS STEP BY STEP. BEFORE CONNECTING “A” PLUG TO THE
ACTUATOR,
CHECK THAT THE VOLTAGE IS THE SAME AS THE ONE SPECIFIED ON THE LABEL (CARTER).
TO CONVERT A STANDARD (ON-OFF) J4C BLUE ELECTRIC ACTUATOR INTO A MODULATING FUNCTION WITH POSI-
TIONER, PROCEED AS FOLLOWS:
Remove the
cap and leave
the o-ring
inside the hole
cap
O-ring
A B
* Fill in the document inside the kit, and send it to the fax number (93 871 32 72) or e-mail: [email protected], shown in the document.
