615 System Manual
Version 1.0 March 21, 2010
37
5: The default values for the
Interface Configuration
are what the J2 UPS uses, therefore
just click
Finish
.
6: When returned to the
Power Options Properties
window, click Apply to save the
configuration. It will take a number of seconds to configure. Once done the
Details
should show
Manufacturer: Generic
and
Model: Custom
and the UPS and driver should
be working. This can be quickly tested by removing the AC power to the unit. If
everything is working, the
Current power source:
should change to
On Battery.
You may now exit the control panel, the UPS configuration is complete.
