615 System Manual
Version 1.0 March 21, 2010
19
CMOS Reset
If it becomes necessary the CMOS memory can be reset to factory defaults by adding the
CMOS reset jumper JP6 for a few seconds and then removing it. This would normally
only be needed to clear an unknown password from CMOS otherwise the normal BIOS
load defaults function could be used.
Onboard SSD
The onboard SATA4 connector is used for the SSD module when a SSD and HDD (or
dual SSD) combo is required. This allows for the use of two SATA storage drives in the
J2 615. This connector may be used when it is not desirable for the SSD to be easily
accessible by the user, maybe for security reasons. (
See illustration below)
