J2 485 System Manual
Version 1.0 May 19, 2012
40
Exit Options
After making any changes to the BIOS settings, new information can be saved from this
Exit Options screen. Any changes can be discarded as well, or the factory BIOS defaults
can be loaded. Typing the F9 key at any time will load the “Optimized Values” which
resets all BIOS setting to the factory defaults.
It should be noted that to save changes to the BIOS setup, the F10 key can be typed from
any screen to save the BIOS changes. It is not necessary to exit setup from this screen.
To discard any BIOS setup changes, simplytype the ESC key from any screen to exit.
Exit Options Screen
