I/O Ports
Most I/O ports are accessible at the back of the unit. The case extends over the cables to
protect them when the computer is located against a wall. Cutouts in the case allow for
routing of the cables in any direction.
I/O Panel
Off / On Buttons
The J2 485 has two power buttons, one in the front of the unit and one in the back of the
unit. The front panel Off / On switch is slightly recessed to prevent accidental powering
off. The function of the button can be controlled by the OS. If the 485 hangs for some
reason it can always be powered off by holding the Off / On button in for six seconds.
The J2 485 also supports the following: Restore on AC On power loss, Wake On LAN,
and Wake On RTC alarm features to control the system power up.
Off / On Button Locations:
