J2 225 System Manual
Version 1.0 May 29, 2012
68
Next the J2 225 can be hung on the bracket by sliding the unit down on the bracket so it
catches on all four mounting clips,
as illustrated below
. This will need to be done by feel,
of course, as you will not be able to see the clips engage.
Next step is to route any cables you need to go to the unit as required. A space is
provided just by the power supply for the cable to exit cleanly, assuming they are routed
via the swing arm cable channel as in a normal install. Cables can also be routed down as
well. Be sure cables are clear or protected of any sharp surfaces. You can remove the unit
on and off the wall mount bracket as needed to route the cables.
Cables can exit the top or bottom when routed between the bracket and unit. A wall hole
could be used to cover the cables in the power supply area.
