11
Check before flight
1. Make sure that your transmitter is fully charged. Conduct a range test of your radio system per the manufactur-
er’s specs.
2. Check all flying surfaces for correct direction of movement, correct amount of movement and for correct center-
ing, adjust as required.
3. Fully charge your flight batteries prior to flying.
4. Hand launch into the wind and land into the wind.
Flight Adjustment
1. On initial flight climb to about 75-100 feet and see if any trim is required. If the model rolls to the right, apply some
left aileron trim to level the wings. If the model dives, apply some up elevator trim, etc.
2. Landing should be made into the wind, reduce the throttle to just above idle and keep the nose level or a little
high allowing the airplane to sink toward the ground. Apply a little throttle as the model reaches an altitude of a
foot or so, this will slow the descent and aid in the flare to a smooth landing.
