INSTRUCTIONS MANUAL
CODE 80014 REV D
May/2011
(It can be modified without notice)
Pag.: 24
J
.P. SELECTA s.a.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 937 700 877 Fax 34 937 702 362
e-mail: selecta @jpselecta.es - website: http://www.jpselecta.es
8 Operation
7.3 PLATFORM INSTALLATION
To fix the different platforms, do as follows:
-
Lossen the four allen screws.
-
Place the platform.
-
Tighten the four screws strongly keeping in mind that the platform has to be
griped by the four washers.
8.1 STARTING UP
-
Connect the equipment to the power supply.
-
Place and look the material to be shaked on the platform.
-
Turn on the main switch (1).
The display shows «-A-» for some seconds.
Keep in mind that if the equipment was stapped by the switch before ending the
work (unless having the set time not finished or by pressing the start/stop key),
the platform will start working at the last speed and time set.
-
Normaly, when the equipment is switched on, the display shows «000».
-
To start, press the start/stop key (8). The work stops on pressing the star/stop
key (8) or when the set time finishes.
8.1.1 SETTING THE SPEED
After doing what is explained on section 8.1:
- Select the led (3) lighted up with the key (6).
- Press the key (5) and, keeping it pressed, select with
the keys (6) and (7) the set speed which will be showed
on the display (2).
8.1.2 SETTING THE WORKING TIME
After doing what is explained on section 8.1:
- Select the led (7) lighted up with the key (4).
- Press the key (5) and, keeping it pressed, select with
the keys (6) and (7) the set time which will be showed
on the display (2).
1
2
3
4
5
6
7
8
