J+J S2, Handbook

Page: 26 / 33

Click on MULTI TURN CONFIG . The computer will
show the following screen. You could set the J4M
actuator up, mounted on both a Needle
or a Diaphragm valve.
VERY IMPORTANT:
First of all, and before doing anything else, please
drive the actuator to the OPEN position, and put
the declutching lever in MAN position too.
Click on NEEDLE or DIAPHRAGM and later click on
CONTINUE .
To go back, click on MAIN MENU .
REMOTE CONTROL:
For
On-Off actuators
only.
You could
OPEN/CLOSE/ STOP OR MIDDLE
POSITION
by clicking on each option.
Click on
“ACTUAL STATUS”
to update the
actuator status.
To go back, click on
MAIN MENU .
If you are making the set up for the first time,
the SELECT TORQUE option will be disabled.
Click on
SELECT TORQUE AND CALIBRATE.
To go back, click on MAIN MENU .
HANDBOOK_
INTERFACE BLUETOOTH PROGRAM_
26
INDEX