I
NITIAL OPERATION
5. Initial operation
5.1. Unpacking
NOTICE
Note the weight (approx. 240kg (529lbs) for stan-
dard lift of 3m (10 ft), each 1m (1ft) of additional
lift increases the weight by 3x 5,8kg (3x 3.9lbs))
of your product
PROFI 16 TI
during transport.
Ensure that the control system is not damaged.
This could lead to malfunctions.
I
Keep the accompanying documents in the
place provided near the site of application.
I
Lift the product carefully out of the packaging.
I
Dispose of packaging in the local recycling
system.
5.2. Attach the hoist
DANGER
Danger from faulty installation
A faulty installation may result in serious acci-
dents.
I
Your product
PROFI 16 TI
may only be installed
by qualified personnel.
WARNING
Danger from chain fracture
Vibrations damage the chain and can lead to
chain breakage.
I
The supporting structure must form a rigid
support.
I
Furthermore, no external vibrations may be
transferred to your product (e.g. from the attached
load).
WARNING
Danger from inadequately sized sup-
porting structure
When loads are taken up suddenly on slack chain,
especially at high lifting speeds, impact forces
result that can be several times the load weight.
I
The attachment points and supporting struc-
ture for your product
PROFI 16 TI
must be able
to securely absorb the forces (
,
→
table 1) to be
expected.
I
Ensure that your product can be freely aligned
under load, as otherwise impermissible additional
loads may occur.
Doc.-No.: VA049318-20-OM-EN-0319-64-6
Page
29
of 64
