J. D. NEUHAUS Profi 025Ti, Operation Manual

Page: 88 / 218

If you wish to transport your JDN Air Hoist to another
site, please observe the following points:
Carefully dismount trolley (if fitted).
Set the entire hoist down carefully; do not allow it
to drop. For weights see
Technical data, page 64.
Lay control and supply hoses together in such a way
that they are not kinked.
Please ensure that the controls are not damaged.
Risk of malfunction.
Draw in the hoist’s chain in such a way that loops
cannot form and the chain cannot become twisted.
Secure the chain.
B R E A K S I N O P E R AT I O N
In the case of longer operational breaks, coat the
chain and hook with a light oil film.
Motor conservation
If the motor lubrication is not renewed after the
specified intervals, the motor must be conserved.
For this purpose, use a non-resinous and non-sticky
conserving oil with conserving protection duration,
which corresponds to the length of the planned
operational break.
S T O R AG E
Close off the air supply hose connection using
adhesive tape or a suitable cap in order to prevent
dirt ingress.
Protect connection for the air supply hose against
damage.
Store your JDN Air Hoist in a clean and dry place.
S T O R AG E C O N D I T I O N S
S A F E T R A N S P O R TAT I O N
powered by air !
T R A N S P O R T A N D S T O R AG E
T R A N S P O R T A N D S T O R AG E
Page 20