J. D. NEUHAUS Profi 025Ti, Operation Manual

Page: 169 / 218

왘
Check air connection for contamination and clean if
necessary.
왘
Blow through compressed air hose in order to remove
foreign bodies.
왘
Attach the compressed air hose to the connection on
the hoist or on the service unit. Tighten the union nut.
The following lubricants are intended for normal
environmental influences.
In the case of wear-promoting environmental
influences, please contact J.D. NEUHAUS, to receive
the appropriate instructions.
C AU T I O N !
Oils and greases can cause skin irritation.
Wear protective gloves.
AT T E N T I O N !
Potential damage! Do not mix synthetic oils
or greases with mineral oils, as the properties
may be impaired.
Also, never mix different types of lubricating
grease within the synthetic or mineral
lubricant groups.
Synthetic lubricants must not be used when
operating with oilers.
Alcohols are not permitted for use as anti-
icing agents.
Attach the compressed air hose and tighten
the union nut.
L U B R I C A N T S
C O N N E C T I N G TO T H E M A I N A I R S U P P LY
powered by air !
I N I T I AL OP E R AT I O N
Page 27