DA N G E R !
Only use attaching cables or attaching chains
which are suitable for the load. Attaching
must not be attempted by winding with the
lifting chain around the load.
In Germany, the trade association regulations ˝Operation
of Load-carrying Devices Used with Lifting Equipment˝
must be observed (BVR 259).
In other countries, the relevant national regulations
are applicable.
Attaching aids must be attached at the lowest point
of the hook. Never load the point of the hook.
Ensure that the hook safety catch is closed.
AT T E N T I O N !
JDN Air Hoists must be capable of alignment
under load. Otherwise impermissible addition-
al forces can occur, which can damage the
hoist components.
First, lift the load hook, in order to pull the slack
chain tight. With the chain tight, briefly interrupt
the lifting procedure. The hoist can align itself and
the material is protected.
Then lift the load.
DA N G E R !
Ensure that there are no persons below
the load.
Then lower the load and ground it carefully.
DA N G E R !
For all air hoist applications, ensure that
the load hook can be lowered all the way
to the ground in order to prevent a load
being moved to the lower limit position,
without reaching the ground. Danger due
to overloading.
Lower the load hook far enough, so that the load
can be easily detached.
Move the load hook out of the lifting area,
in order to avoid hazardous situations.
If you wish to interrupt working with your
JDN Air Hoist:
Set down and detach the load.
Move the load hook out of the lifting area,
in order to avoid hazardous situations.
I N T E R R U P T I N G W O R K I N G
D E TAC H I N G T H E L OA D
L OW E R I N G T H E L OA D
L I F T I N G T H E L OA D
Attach the load safely
AT TAC H I N G T H E L OA D
powered by air !
O P E R AT I O N
Page 27
Summary of Contents for JDN mini 1000
Page 47: ...powered by air NOTES Page 47 ...
