Operation Guide
Before using the BGP-2000, first make sure to prepare following steps are ready for
operation.
The GPS application software is correctly installed in the host platform(s)
The BGP-2000 is fully power charged
Check the Bluetooth is ON in the host.
For information about the operation of the host and GPS application software
installation procedures, please refer to the documentation that accompanies each
product, respectively.
In this Chapter, a step-by-step operation procedure is described.
1. To install the GPS/MAP application software
Before operation the BGP-2000, make sure the GPS/MAP application software is
properly and completely installed in the hast platform.
To install the GPS/MAP application, please consult and follow the operation guide
described in the user guide of the GPS/MAP application software. Make sure the
GPS/MAP application installed completely.
2. To pair/connect the BGP-2000 with the host
To pair and connect your BGP-2000 with the host platform, please consult and follow
the operation guide described in the user guide of the host or PDA.
First, turn on the power of host and BGP-2000, respectively.
-
Turn on the power of the host and ready.
-
Turn on the BGP-2000
( Make sure the battery of the BGP-2000 is fully charged.)
