Product overview
1
Auxiliary handle
2
Auxiliary handle fixation knob
3
Spindle lock button
4
Ventilation throttle
5
Detachable guard
6
Spanner
7
Main handle
8
On/Off switch
9
Lock button
10
Speed dial
11
Hose connector
Intended use
The tool is intended for dry sanding of drywalls,
ceilings and walls, grinding concrete, as well as
removing plaster, wallpaper, paint residues, ad-
hesives and loose plaster. The tool is not intended
for commercial use or for removing material con-
taining toxic materials e.g. Asbestos or lead.
Any other use or modification to the tool is consid-
ered as improper use and could cause consider-
able dangers.
Preparing the tool
Warning!
Switch off and unplug the
tool before any preparation, disassem-
bly, exchange and maintenance work.
DUST COLLECTION
Slide the hose connector
11
onto the air
exhaust as shown. Lock it in place by turn-
ing it counter-clockwise.
Plug the hose of an appropriate dust col-
lection system in the hose connector
11
.
Warning!
Never use the tool without a
dust collection system.
1
2
AUXILIARY HANDLE
Loosen the two knobs
2
of the auxiliary
handle
1
counter-clockwise.
Set the auxiliary handle
1
to the desired
angle and re-tighten its two knobs
2
clockwise.
1
2
EN
104
