Mini disk sander
«NanoGrinder»
VERSION 2.0
ShipWorkshop.com
Page 1: ...Mini disk sander NanoGrinder VERSION 2 0 ShipWorkshop com ...
Page 2: ...le and grinding disk is adjustable Soft pads eliminate excessive noise and vibration The opening in the table butt and flat motor cover allow to fasten the machine with a clamp Package contents 1 Guiding stop protractor Allows to set both free and preset angles with pitch of 15 and 22 5 degrees 2 Two abrasive disks with hook loop and without it grain 100 3 Power supply 4 Assemly and adjustments ma...
Page 3: ...e removed 4 Move Table 3 flat against Disk 2 5 Attach the first Plate 4 to the Table 3 using double side tape The edge of the Plate should be parallel and flat against Disk 2 6 Move Table 3 from Disk 2 to make a small gap so that the Disk does not engage the Table when rotating 7 Fix the Table 3 by screws from both sides 8 Place the stop protractor 5 flat against the first Plate 4 Attach the secon...
Page 4: ......
