1
3
4
4
2
5
7
6
Basic features
• Microgrinding machine «NanoGrinder» is intended for working with wood,
nonferrous metals, steel, plastic, cork and rubber.
• Grinding disks of 60 mm in diameter are firmly attached with double side tape or
with hook & loop, which allows prompt replacement.
• Grinding disks rotating speed and direction are adjustable.
• The gap between the worktable and grinding disk is adjustable.
• Soft pads eliminate excessive noise and vibration.
• The opening in the table butt and flat motor cover allow to fasten the machine
with a clamp.
Package contents
1. Guiding stop-protractor. Allows to set both free and preset angles with pitch of
15 and 22,5 degrees.
2. Two abrasive disks (with hook & loop and without it), grain 100.
3. Power supply.
4. Assemly and adjustments manual.
Parts of the machine
1. Motor
2. Disk
(2)
3. Working table
(3)
4. Table plates
(4)
5. Stop-protractor
(5)
6. Rotating direction switch
(6)
7. Rotating speed adjustment knob
(7)
