EN
87
OPENING THE CONTAINER
Wear respiratory protection. Disconnect
the hose
10
. Close the container lid
9
.
Loosen the clamps
5
on both sides of the
container. Lift up the filter unit
4
.
Caution!
Wear respiratory protection.
1
WET VACUUMING
Open container
8
and remove filter bag,
if inserted.
Caution!
If foam or liquid comes out:
Switch off and empty container and
folding filter cassette.
1
1
DRY VACUUMING WITH FLEECE FILTER
BAG
Pull the flange of the fleece filter bag
17
over the suction spigot bottom first. Set
the rotary slide to CLOSE for fleece filter
bags.
Liquid level sensor automatically stops
the cleaner when container is full. Empty
container and switch off cleaner before
restarting. Regularly check and clean the
sensor pins.
2
Caution!
When using PE bags, switch
on cleaner when lifting up top section
to remove any floating dust.
CHANGING THE FOLDING FILTERS
Open hood
16
. Replace both folding fil-
ters. Dispose of used filters in a dust-
proof plastic bag.
Caution!
Never use the cleaner with-
out folding filters.
1
CHANGING THE MOTOR FILTER
Replace a dirty motor filter or clean it un-
der flowing water. Dry before re-inserting.
Replace the folding filters. Never use the
cleaner without or with wet or dirty motor
filters.
2
OPENING FILTER UNIT HOOD
Turn the lock of the opening lever
12
90°
counter-clockwise with a coin and push in
the opening lever
11
.
Caution!
Wear respiratory protection.
1
CLOSING FILTER UNIT HOOD
Lift the retainer
(a)
before closing the fil-
ter unit hood
16
.
2
DRY VACUUMING WITH PE COLLECTION
BAG
Pull the flange of the PE collection bag
18
over the suction spigot bottom first. Set
the rotary slide to OPEN for PE collection
bags.
2
2
Summary of Contents for JBS 1625 M
Page 84: ...EN 84 ...
