16
March 1
st
, 2015
3. Insert entirely the roll formed end into the stove collar and
screwing
it
with
a
minimum
of
3
screws.
WARNING: It is mandatory to screw the pipe to the stove
collar and also at each joints with a minimum of 3 screws.
4. Install all the next section up to the roof chimney support
and don’t forget to screw the chimney connector to the roof
support collar.
DO NOT CONNECT CONECT THIS UNIT TO A CHIMNEY
FLUE SERVING ANOTHER APPLIANCE..
CONNECTOR PIPES SHOULD NEVER PASS THROUGH
THE CEILING, THROUGH A WALL, IN A CLOSET, IN AN
ATTIC OR OTHER ENCLOSED AREA THAT COULD
CAUSE HEAT BUILDUP. IF YOU NEED TO PASS
THROUGH COMBUSTIBLE MATERIAL, MAKE SURE
THAT YOUR INSTALLATION COMPLIES WITH CAN /
CSA-B365.
.
