29
EN
PG-100
Fig. 23
• To control the nape of the neck or hairline,
turn the appliance and hold it with the
trimming attachment pointing downwards
(fig.24).
Fig. 24
• To control the sideburns, turn the appliance
and hold it with the trimming attachment
pointing downwards (fig.25).
Fig. 25
Cleaning
• Before performing any cleaning operation,
it is absolutely necessary to unplug the
appliance from the mains.
CAUTioN
: To avoid the danger of
electric shock, do not immerse the
appliance in water or any other liquid
and do not hold it under running water.
• Do not use water or a moist cloth to clean
the groomer.
• Always switch groomer off before cleaning.
• Do not use abrasive, scourers or liquids
such as alcohol, benzene, bleach or
acetone to clean the groomer.
• Never clean, replace or remove groomer
attachments with motor on.
• Do not apply pressure to cutters.
• Do not touch cutters with hard objects as
this may damage them.
• Do not use while bathing, showering.
• Do not immerse the groomer in water or
other liquids as damage to groomer may
occur.
During Use:
• If cut hairs have accumulated in the guide
comb area, remove hairs by shaking,
blowing or using cleaning brush provided.
• Remember to adjust the trimming length
back to your selected setting when you
replace the guide comb on groomer.
Cleaning once a week:
• Make sure the groomer is switched off and
disconnected from the electrical outlet.
• Remove any attachment.
• Also separate the top part of the micro
shaver attachment from its body (fig.26).
Fig 26
• Blow and/or shake out any hair that may
have accumulated in the attachment.
• The shaving foil is very delicate and should
not be handled.
