27
EN
PG-100
Shaving With Micro
Shaver Attachment
• Put the micro shaver attachment on the
groomer (fig.16).
Fig. 16
• Use the narrow micro shaver to shaver long
contoured edges to remove any stubble
while creating a smooth well-defined beard
line.
• Before using the micro shaver, always check
it for wear and damage. If the micro shaver
shows signs of wear or damage, do not use
it as injury may occur. Do not use the micro
shaver until it has been replaced.
• Gently press the micro shaver onto the skin.
Do not press too hard.
hair Clipping
• Make sure that the appliance is fully
charged before you start clipping hair. The
appliance will not operate while cord is
connected to electrical outlet.
• Before you start clipping, make sure that
the head of the person whose hair you are
cutting is at the same level as your chest
so that all parts of his/her head are clearly
visible and within easy reach.
• Only use the appliance on dry hair.
• Do not use on freshly washed hair.
• Before you begin, comb the hair in the
direction of growth.
• To achieve optimal clipping results, always
move the appliance slowly through the hair
against the direction of hair growth.
Clipping with hair comb
Attachment
• Put the hair clipper comb on the fully width
trimmer attachment and push until you hear
it ‘click’ into place (fig.17).
Fig. 17
• Press the hair length selector and slide it to
the desired setting. See Table II.
• The setting selected will appear in the
window to the left of the hair length selector
(fig.18).
Fig. 18
• When you are clipping for the first time start
at the maximum clipping length setting (No
9) to familiarize yourself with the appliance
and prevent accidentally trimming hairs
too short. As you become familiar with the
setting, adjust the hair length selector to
desired trimming length. Selector will ‘click’
into position at each setting.
• Make sure that the flat part of the comb is
always in full contact with the scalp to obtain
an even result (fig.19-20).
