IZUMI VIDAN PREMIUM IZF-800, Manual

Page: 22 / 76

English
20
HOW TO RECHARGE
1 Recharge the shaver in the following cases:
2 Recharging procedure
●
When the shaver is first used after being purchased or being left unused
for a long time, be sure to
recharge the shaver for 8 hours to the
full capacity before use, to activate the rechargeable battery. After
that, approximately 1 hour of recharging will fully recharge the shaver.
* Recharge the shaver when the power reserve indicator lamp at the bottom lights
up in red.
1) Push the power switch to turn off the shaver, lock the shaving head,
and put the cap on.
* For the method of locking the shaving head, refer to page 23.
* The shaver cannot be recharged while it is turned on.
2) Insert the socket plug of the AC adaptor securely into the socket at
the bottom of the shaver.
* Before putting the plug of the AC adaptor into the socket of the shaver, make sure
that the socket is completely dry to prevent any possible malfunction.
Remarks on "Battery Memory Effect":
To avoid Memory Effect, recharge the shaver after the energy reserve is
completely depleted.
●
What is "Memory Effect"?
If the Ni-MH battery in your shaver is repeatedly recharged before it
runs out of energy, the voltage drops more quickly to decrease the
number of times you can use the shaver before the battery runs down.
●
If you have noticed the "memory effect"
If the full recharge allows less number of shaves before the battery is
depleted, consume the recharged energy completely, and then recharge
the shaver for approximately 8 hours. Repeating this procedure 2 to 3
times will restore the battery. If the "memory effect" persists, the service
life of the Ni-MH battery may have expired. Consult the retailer from
whom your shaver was purchased.
To recharge the shaver, do not use any other apparatus than
the AC adaptor included with the shaver.