IZUMI VIDAN PREMIUM IZF-800, Manual

Page: 29 / 76

English
27
REPLACEMENT OF OUTER FOIL/INNER BLADE
The outer foil and inner blade are consumables. In order to enjoy a
comfortable clean shave, it is recommended that the outer foil and inner
blade be replaced with new ones at least once a year and once in two
years, respectively. Use of blade or foil beyond its serviceable life may
not only result in poor shaving performance but also damage such blade
or foil to scratch your skin. Contact the retailer from whom your shaver
was purchased for the replacement outer foil and inner blade.
* The above replacement periods of outer foil and inner blade serve as
guidelines only, and their serviceable lives vary greatly depending on
the condition of use of each user. If you find them unable to give a
good shave, damaged or deformed, replace them with new ones
immediately.
● Outer foil
SO-800
●
Inner blade
SI-800
HOW TO REPLACE OUTER FOIL/INNER BLADE
●
Outer foil
1) Press both the outer foil unit release
buttons to remove the outer foil unit.
(Fig. 1)
2) Pull up the two hooks inside the outer
foil unit to remove the outer foil. (Fig. 2)
3) Set the new outer foil into the outer
foil unit in the proper direction, and
push it until it clicks in position.
●
Inner blade
1) Remove the outer foil unit. (Fig.3)
2) While holding the side faces of each
inner blade with fingers, and lift it
upward to remove it one by one. (Fig. 4)
3) Set the new inner blade to the vibrator
by pushing it downward.
Before replacing the outer foil/inner blade, be sure to turn off
the shaver.
Fig. 1
Fig. 2
Fig. 3 Fig. 4
Hook