background image

An

Company

Copyright ©2010 by Zilog

®

, Inc. All rights reserved.

www.zilog.com

Introduction

This quick qtart guide provides instructions and configuration information for 
Zilog’s eZ80F91 Mini Ethernet module, eZ80Acclaim!

®

 Modular Development System 

(MDS) adapter board, and associated components. The eZ80F910100KIT and 
eZ80F910200KITG modular development kits are covered in this quick start guide.

Kit Contents

For a complete list of material shipped with the eZ80F91 Modular Development Kit 
(eZ80F910200KITG), refer to 

eZ80F910200KITG eZ80F91 Series Development Kit 

Packing List 

(PAK0015).

System Requirements

Table 1

 lists the system requirements for running ZDS II.

Table 1. ZDS II System Requirements

Recommended Configuration

Minimum Configuration

PC running MS Windows XP 
Professional

PC running MS Win2000–SP4/WinXP Professional

Pentium III/500 MHz or higher 
processor

Pentium II/233 MHz processor

128 MB RAM

96 MB RAM

110 MB hard disk space

25 MB hard disk space (documentation not 
installed)

Super VGA video adapter

Super VGA video adapter

CD-ROM drive

CD-ROM drive

One or more RS-232 
communication port

One or more RS-232 communication port

USB high-speed port

USB high-speed port

eZ80F91 Modular 
Development Kit

Quick Start Guide

QS004611-0810

Summary of Contents for Zilog eZ80F91












Reviews: