Functional description
Function
Setting possibilities
Key word
Baudrate for
CAN1 and CAN2
1. Automatic baud rate detection
2. Setting of a CIA-baudrate
3. Setting of the bus timing register
BTR0 / BTR1
BaudRate
(under [CANBus1]
or [CANBus2])
Frame format for
CAN1 and CAN2
1. Standard frame format (11-bit
identifiers)
2. Extended frame format (29-bit
identifiers)
FrameFormat
(under [CANBus1]
or [CANBus2])
Activate gateway
table for CAN1
and CAN2
1. Use gateway table
2. Do not use table, then all mes-
sages are transmitted to the other
segment unchanged
UseGatewayTable
(under [CANBus1]
or [CANBus2])
Repeater
functionality
1. Switch on repeater functionality:
All messages are transmitted un-
changed to the other segment in-
dependently of frame format.
2. Switch off repeater functionality:
the settings under frame format
and gateway table are taken into
account.
RepeaterFunctionality
(under [General])
Restart after Bus
Off
1. Allow restart after Bus Off
2. Do not allow restart after Bus Off
CANBusOffRecovery
(under [General])
Table 5-1: Possible settings of the CANbridge
5.2 Data Structure of the Configuration Files
A template of the ASCII configuration file can be generated with the download
tool (see Section 6). The required configuration can be easily created with the
template and a text editor. The data structure is based on the Windows INI-
Format.
The setting possibilities of the configuration file are listed in the following:
Copyright IXXAT Automation GmbH
CANbridge - Manual, V1.4
16