Generic Mode Network and Device Communication
48 (62)
D DEVICE_NAME_SET
Changes the CANblue device name. The device name is transferred to the host device when a
new configuration is established. Changes must be saved with command
Observe that changes are applied after a reboot of the device.
D DEVICE_NAME_SET <name>
Parameter
Parameter
Description
name
Alphanumeric string, including special characters (but no blanks). Valid range is 10-16
characters. The MAC ID is automatically added to the device name. In Bridge
configurations use the same name for each device (the devices are distinguished by the
MAC address). Value
*
resets the name to the default name.
Example
D DEVICE_NAME_SET TEST
sets the device name TEST(0012F331DA4D).
Possible Return Values
Return Value
Description
I OK: DEVICE_NAME_SET
Function succeeded
Remark
The factory reset does not reset the name. The name can be read with command
CANblue II User Manual
4.01.0126.20000 EN 3.2
