Support: 855-473-7449 or 408-943-4100 Email:
Page 18
8.4.2 Installing Hard Drives
The R50 allows inserting hard drives directly into the system without requiring additional installation into a detach
-
able tray. To install a hard drive, open the drive bay to expose the drive slot covers. Slide the blue release tab (
1
) on
a slot cover and lift (
2
). Gently grasp the inner tray and slide it up until it clicks into place (
3
).
Take the hard drive and align the connectors facing downwards into the system. The power and SATA connectors
are typically aligned to the
left
side of the tray (
1
). Slide the drive into the tray, push in the plastic release tabs on
each side of the tray and push the tray downwards to install the drive into the system (
2
). Close the slot cover and
make sure it clicks into place (
3
).
