IXSEA Rovins Quick Start Manual Download

Page: 8 / 21

2010-05/MU/ROVINS-001-B

STEP 2. ACTIVATING THE PRODUCT LICENSE (ONLY FOR UPGRADE CASE)

As soon as ROVINS is powered up it starts its alignment phase starting with the manually input position stored into RO-

VINS PROM. It is required that a valid initial position is input manually (see Step 3) or is given by the GPS. The alignment

sequence is detailed in Step 4.

Launching the WEB-based User Interface

Required environment :

•

The workstation must be equipped with one of the following Web browser:

Mozilla Firefox version 3.5 and higher

Chrome version 4 and higher

Safari version 4 and higher

Opera version 10 and higher

Internet Explorer version 7 and higher

•

Flash Player version 10 (and higher) must be installed on the workstation to visualize the compass

•

For the data logging: Java Runtime Environment 1.6 (and higher)

They can be installed on your workstation from the provided IXSEA CD-ROM.

The communication with the workstation is performed directly through the Ethernet link.

ROVINS

Web-based User Interface is then launched from the WEB browser hosted on the workstation. Its URL address

is 192.168.36.1xx, xx being the two last numbers of the ROVINS serial number:

The Control Pages opens:

During the first seconds the IXSEA logo is flashing gray/blue indicating that the

Web-based User Interface is loading the

internal configuration of ROVINS. Then the logo turns blue, the alignment sequence of ROVINS begins.

10.

11.

16.

17.

21.

22.

25.

26.

Power

Cenral connector

Function

Pin 1

In GND

Pin 2

Pulse In

Cenral connector

Function

Pulse A

IN TTL

Pin 20

GND_A

Pin 21

RS232

Cenral connector

Function

Link A

Pin 11

Pin 13

Tx Rx GND_A

Pin 8

Repeater/com

with worksation

RS232

Cenral connector

Function

Repeater

Pin 9

Pin 15

Tx Rx GND_R

Pin 5

RS422

Cenral connector

Function

Link A

Tx +

Pin 11

Tx -

Pin 12

Rx +

Pin 14

Rx -

Pin 13

Tx Rx GND_A

Pin 8

Repeater/com

with worksation

RS422

Cenral connector

Function

Repeater

Tx +

Pin 9

Tx -

Pin 10

Rx +

Pin 16

Rx -

Pin 15

Tx Rx GND_R

Pin 5

GPS Antenna, Power supply, workstation

connected to the Central connector

Summary of Contents for Rovins






















Search results

Summary of Contents for Rovins

Reviews:

Related manuals for Rovins

Brands by name

Popular brands

IXSEA Rovins, Quick Start Manual

Search results

Summary of Contents for Rovins

Reviews:

Related manuals for Rovins

Brands by name

Popular brands