INTAKE LEGS / INTAKE PLATE ASSEMBLY
1. Attach the Intake Legs to the housing of the AP unit with
the bolts provided.
2. Attach the Intake Plate to the bottom of the Intake Legs.
3. Attach the 10” Stainless Steel Float Ball with retrieval
chain to the housing to the lifting eyebolts with the
quicklinks provided in the kit. (See Figure 1)
Unit Installation - Pedestal
AP7000 & AP8000
ANCHORING
For pedestal configurations, the weight of the unit is
adequate for holding the unit in place when resting on the
bottom. In some applications, suspending the unit from and
structure above will work, just be sure to use the dedicated
lifting eyelets or eyebolts.
1
2
Figure 1:
AP Unit Pedestal Configuration
3
OPTIONAL HOSE ASSEMBLY
AND ATTACHMENT
For attaching hoses to the unit, assemble using hose clamp
and 5/16" nut driver on each end. Prior to tightening hose
clamp, be sure that the clamp is located above the barb on
the hose flange to prevent the hose from slipping off the
flange during operation.
TOOLS REQUIRED
Pliers
5/16” Nut Driver
13mm Socket Wrench and Open End Wrench
Model may vary
© 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | [email protected]
Installation
10099_20200602
O&M_AP7000_&_AP8000_10097_20200602 - 6
